Description; Installation; Configuration Dip Switch - golmar TCD-R5ML Manual De Instalación

36
D D
escription of the converter. escription of the converter.
D
etail of the converter installation.
Install the converter in a dry and protected place free from the risk of drip or water projections.
To avoid damage the converter must be firmly fixed.
The converter can be installed on a DIN guide
(6 elements), pressing it lightly.
To extract the converter from the DIN guide,
use a plain screwdriver to lever the flange as
shown in the picture .
Install or modify the equipment without the power
connected.
The installation and handling of this equipment must be
performed by authorised personnel
To install the converter directly on the wall, drill two holes of
Ø6mm. and insert the wallplugs. Fix the converter with
the specified screws.
DIN 46277

DESCRIPTION

DIN rail latch release DIN rail latch release
Autodiagnostic LEDs Autodiagnostic LEDs

Configuration dip switch

Configuration dip switch
R5 connection block R5 connection block
PLUS connection block PLUS connection block

INSTALLATION

.