Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting to the vehicle battery
1. Connect the blue connector of
the jumper cable to the 12V jump
start port of the jump starter.
3. A) Once connection is made, the green status indicator light in the
jumper cable will turn solid. Only then can you attempt to jump start
your vehicle. (Do not jump start more than 4 consecutive times)
B) If the green light does not turn solid or the red light is on or beeping
sound is heard, refer to the troubleshooting table for further actions.
4. After the engine starts,
A) Disconnect the battery clamps from the battery terminals and
B) Unplug the jumper cable from the jump starter.
6
2. Connect the RED battery clamp
to the positive (+) and the BLACK
battery clamp to the negative (-)
terminal on your vehicle's battery.
Tabla de contenido
