Steren SEG-155 Manual De Instrucciones página 26

Trouble
After reading card, there are 3
beeps and door lock does not
open.
The enrolled card can not open
the door.
Pressing [*] + [Programming pin]
there is long beep and can not
enter to the programming mode.
Pressing [5] there are 3 beeps.
Pressing [5] + [User ID code]
there are 3 beeps.
Pressing [5] + [User ID code] there
are 2 beeps and then to
presenting card there are 3 beeps.
11
Solution
·
The system is in Card and pin mode.
·
The [#] key was pressed; Wait for 5 seconds to
present card.
·
Check if the door sensor is in an alarm status.
·
Disable the door alarm sensor.
Other keys were pressed before pressing the [*] key.
Hold down the [*] key after hearing a long sound, try
entering the programming mode again.
The control has full card capacity.
This user ID code is in use, select another user ID
code.
This card is in use.