Connecting The Speakers; Installing The Measuring Microphone - Loewe 3D Orchestra 5.1 IS Instrucciones De Manejo

n
3D Orchestra
Instruction manual

Connecting the speakers

Installing the measuring microphone

Connecting the speakers to the power
supply
Insert the small plug (S) of the supplied power cord into the power
receptacle on the bottom side of the speaker. Feed the power cable
through the strain relief (Z) intended to prevent inadvertent disconnec-
tion of the power cord.
Insert the large plug of the power cord into a 220-240V 50/60 Hz
power outlet.
Proceed in the same way with additional speakers.
Insert the small plug (S) of the supplied power cord into the mains
socket at the side of the subwoofer.
Insert the large plug of the power cord into a 220-240V 50/60 Hz
power outlet.
Switch on the subwoofer by switching the POWER toggle switch to
position I.
S
- 20 -
S Z
Installing the measuring microphone
Before using it, the supplied measuring microphone must be assem-
bled. First, feed the microphone cable through the pipes / couplings
and the foot. Mount these parts as shown in the sketch below.
Make sure you only hold the measuring microphone at the base
and not on the tube during transport.
2x