t
emperature iNDiCator
The
symbol indicates the location of the coldest zone of your refrigerator,
whose temperature is less than or equal to 4°C. This zone is located at the top of the
unit (in zone 1).
To properly preserve food in your refrigerator, particularly in the coldest zone, make
sure that "OK" appears in the temperature indicator.
Incorrect setting
Correct setting
If "OK" does not appear, the average temperature of the zone is too high. Set the
thermostat to a higher position.
Whenever you adjust the thermostat, wait for the temperature inside the appliance
to stabilise before adjusting it again, if necessary. Only change the position of the
thermostat gradually and wait at least 12 hours before checking again and possibly
changing it.
Note: After loading the appliance with fresh food or after opening the door repeatedly
(or leaving it open for a prolonged period), it is normal that the word "OK" does not
appear in the temperature indicator; Wait at least 12 hours before readjusting the
thermostat.
If the evaporator in the refrigerator compartment (back wall of the appliance)
becomes abnormally frost-covered (appliance overloaded, high room temperature,
high thermostat setting, frequent door openings), gradually turn the thermostat
knob back to a lower position until the compressor stops running periodically again.
The refrigerator compartment will only automatically defrost if the compressor stops
intermittently.
s
toriNg fooD
In a refrigerator, the temperature is not uniform (with the exception of ventilated or
stirred cold appliances), which is why there are appropriate areas for each type of
food. Refer to the following instructions for storing food:
29
V.1.0