WARNING: Do not replace the pressure
relief and non-return valve supplied with
the appliance with a non-return valve
(clapet).
WARNING: connect the water drain of
the valve to a rubber hose having an
internal Ø of 9,5 mm.
This drain hose has to be installed with
a continuous downwards gradient and
located in a place protected from ice.
CIRCUIT DIAGRAM
10. WIRING
THE MANUFACTURER DON'T ACCEPT
RESPONSIBILITY
DAMAGE
MISSING EARTH CONNECTION OF THE
APPLIANCE.
FOR
POSSIBLE
OR
INJURY
CAUSED
11. USE INSTRUCTIONS
1.
2.
a.
b.
c.
d.
e.
12. MAINTENANCE OF THE APPLIANCE
BY
WARNING:
before
working
thermostat, be sure that the electrical
supply is completely cut off.
WARNING: connect the power to the
electrical heater element only when the
storage tank is filled with water.
The heater element is not for a dry
operation.
2010-03
on
the