Tabla de contenido
Idiomas disponibles
Idiomas disponibles
function - charging the batteries
1. Insert the adapter plug (6) in the charging station (4) and plug it into the power outlet
2. Place the control unit (1) in the charging station.
3. Turn the control unit to the right. Make sure the symbol
4. The first time you recharge the control unit recharging will take approximately 3 to 4 hours.
5. Remove the control unit by turning it counterclockwise.
The adapter and the control unit can get warm during charging. This is normal. It is recommended to
remove the control unit before use and let it cool for some time.
function - before first use
Fill the spice mills to your own preference and liking with peppers, salt or herbs.
Remove the Twist-cap of the spice mills and fill the reservoir.
Do not fill the reservoir for over approx. 75% of its capacity.
function - use
You can use the 5 different spice mills manually or fully automatic.
Manually:
1. Take the spice mill from the spice carousel.
2. Hoover the spice mill above the dish.
3. Turn the twist cap to grind spices and to sprinkle them on the dish.
4. Place the spice mill back in the Spice carousel.
Fully automatic:
1. Take the control unit from the middle of the spice carousel.
2. Take the spice mill from the spice carousel and pull the twist cap off.
3. Fix the control unit on top of the spice mill and turn a quarter turn. Make sure that the
corresponds with the
•
The coarseness of the spices can be adjusted with the 'screw' in the bottom. Turn it to the right for
a finer grind, turn it to the left for a coarser grind
4. Hoover the spice mill above the dish.
5. Press the grind button (2) to grind the desired amount of spices. The light is lit at the bottom at the
same time.
6. After use, remove the control unit from the spice mill by turning a quarter turn.
7. Place the control unit back on the carousel in the right way. See instructions at "Function-charging".
8. Place the twist cap back on the spice mill and place it back in the spice carousel.
cleAning And MAintenAnce
Clean the appliance with a damp cloth. Dry thoroughly with a dry cloth.
•
Don't use any aggressive cleansers.
•
Never immerse the appliance in water or other liquid.
symbol.
Figure 3
Coarseness-setting
Coarse:
16
instruction manual
corresponds with the
Figure 2
Fine:
symbol
symbol
Tabla de contenido
