Tabla de contenido
Idiomas disponibles
Idiomas disponibles
30
ATTACHMENT STORAGE
The attachment storage carousel fits inside the bowl.
TO USE THE STORAGE CAROUSEL
1 Fit the knife blade to the bowl.
2 Then fit the whisk and discs, into the carousel
3 Fit the carousel over the knife blade and place the processor lid on top
CARE & CLEANING
- Always switch off and unplug before cleaning.
- Handle the blades and cutting discs with care - they are extremely sharp.
- Some foods may discolor the plastic. This is perfectly normal and won't harm the plastic or
affect the flavor of your food. Rub with a cloth dipped in vegetable oil to remove the dis-
coloration.
Power unit
- Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
- Store excess cord in the storage area at the back of the
S
machine
.
Blender/mill
1 Empty the carafe/jar before unscrewing it from
the blade unit.
2 Wash the carafe/jar by hand.
3 Remove and wash the seals.
4 Don't touch the sharp blades – brush them
clean using hot soapy water, then rinse thor-
oughly under the tap. Don't immerse the blade
unit in water.
5 Leave to dry upside down.
Twin beater geared whisk
- Detach the beaters from the drive head by gen-
tly pulling them free. Wash in warm soapy
water.
- Wipe the drive head with a damp cloth, then
dry.
Do not immerse the drive head in water.
All other parts
- Wash by hand, then dry.
- Alternatively they can be washed on the top rack of your dishwasher. A short low temperature
program is recommended.
SERVICE AND CUSTOMER CARE
- If the cord is damaged it must, for safety reasons, be replaced by De'Longhi or an authorized
De'Longhi service center.
- If you experience any problems with the operation of the processor, before calling for assis-
tance refer to the troubleshooting guide.
12
Q
.
R
.
Q
A
B
R
S
K
I
Tabla de contenido
