Hardware Installation - IOGear GUH304 Guia De Inicio Rapido

Hardware Installation

1. Connect the hub to your computer.
2. Blue LED light will indicate hub is receiving power.
3. Plug the USB devices* you wish to connect to your computer
into the hub.
4. Plug the AC Power Adapter** into a power outlet and the
opposing end of the cable into the hub's AC power jack.
*Hub is compatible with USB 3.0, 2.0, and 1.1, but SuperSpeed
rates are only possible when hub is plugged into a computer's
USB 3.0 port and the peripherals connected to the hub are USB
3.0 devices.
**Optional (not included) with GUH304, included with GUH304P.
1 A
Backspace
3