Mounting Your Camera - AKASO V50 Elite Touch Manual De Usuario

Do not store your battery with metal objects, such as coins, keys or necklaces. If the
battery terminals come in contact with metal objects, this may cause a fire.
Do not make any unauthorized alterations to the camera. Doing so may compromise
safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects into the
battery opening on the camera. Do not use the camera or the battery if it has been
damaged - for example, if cracked, punctured or harmed by water. Disassembling or
puncturing the battery can cause an explosion or fire.
REMOTE
Remote Microphone
Photo Indicator
Video Indicator
Power Button
Press and hold Power Button for 3s to turn On / Off the remote.
Video Button
To record Video, verify the camera is in Video mode.
Photo Button
To capture a photo, verify the camera is in Photo mode.
CONNECTING YOUR V50 ELITE WITH REMOTE
1. Turn on camera.
21
Remote Indicator
Power Button
Photo Button
Video Button
Splashproof only, not waterproof
2. Press and hold the Down button for three seconds to turn on BT. The screen shows 'BT
ON' - 'Scanning'.
Note: You can also go to Camera Setting to turn on BT.
3. Press and hold the Power button to turn on remote. The remote indicator flashes every
second during connecting.
4. The camera screen shows 'Connected'. Remote indicator remains on after V50 Elite
connects with remote successfully.
Note: Photo indicator flashes when you take a photo. Video indicator flashes two seconds
during video recording.

MOUNTING YOUR CAMERA

Attach your camera to helmets, gear and equipment.
22