Loading The Tool - Stinger CN100B Manual Del Propietário

LOADING THE TOOL

• Disconnect air. Open the Magazine Cover.
• Place cap reel in the Basket (tape must be
removed from reel before inserting). Make sure
the front end of the cap reel is placed over the
cap guide area of the basket. Insert lead cap
into the feed chute.
• Close the Magazine Cover.
• Slide caps along the Feed Chute with fingers
until the first cap is positioned under the Nose.
•Depress the latch on the Nail Gate and Basket
Cover. Open the Nail Gate and Basket Cover.
Place one nail coil in the Basket so it fits
securely around the center post.
• Insert lead nail into the nose. Lay the following
nails flat onto the Feeder Pawls.
• Close Nail Basket cover and Nail Gate. Be sure
the latch is securely fastened.
•Plug into air source. The tool is ready to use!
5