Rating Plate; Operation And Handing; Pouring In Water; Operating The Device - CASO DESIGN 1500 Operación Manual

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60

13.4 Rating plate

The rating plate with the connection and performance data can be founded beneath the
device.

14 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not leave the device unsupervised when it is in operation, so that you can intervene
quickly in the event of dangers.

14.1 Pouring in water

Unplug the unit before filling the tank. Do not exceed the MAX mark.

14.2 Operating the device

Please note
► General Cleaning: Use only plain water for general cleaning. The water should merge
the item but not exceed the ruling mark.
► Enhanced Cleaning: When the item is smeary or extraordinary dirty, add about 5-10ml
of detergent (offered in specialised stores) or some drops of washing-up liquid into the
water to enhance the cleaning result.
caso Ultrasonic Cleaner
Open the lid, and fill the stainless steel tank with water.
Place the item into the water. The item should be immerged
well into water. However, do not exceed the "MAX" mark.
Close the lid and plug in the appliance.
Press the ON button to start the cleaning process – the red
indication light turns on.
During cleaning, you can hear the ZIZI sound; it means the unit
is working.
The unit will stop automatically after 3 minutes. If another
cleaning is needed, press the ON button again.
You can press the OFF button during the cleaning if you want
to stop it.
When the cleaning is finished, unplug the unit and open the lid.
Take out the item. At last, pour the water from the stainless
steel tank and wipe it out.
29
Tabla de contenido
loading

Tabla de contenido