Basic Function Operation; Basic Parameter Setting; A/D Count; High / Low Limits Setting - Gram K2 Manual De Utilización

BASIC FUNCTION OPERATION

Press and hold this key for 2 seconds to turn off the balance.
Press this key to turn on the balance
Function 1. To select the desired weight unit.
Function 2. To exit from setup mode.
Function 1. To reset the weight to zero "0", but the display value has to be
Function 2. To move one space to the left or downward in setup mode.
Function 1. To subtract the container´s weight.
Function 2. To move one space to the right or upward in setup mode.
Function 1. To view gross or net weight when the balance is on tare
status. All other keys will be disabled when gross weight is activated.
Function 2. To increase values upward in setup mode.
Function 1. Key of confirmation in setup mode.
Function 2. Manually transmitting data through RS232 to computer or
printer.

BASIC PARAMETER SETTING

To access to functions setting, press the
Press the to select the parameter (UF-1 ~ UF-9)
.
UF-1 A/D count
1. Press the
2. To move to next parameter press the ► key.
3. To exit and return to normal weighing press the
UF-2 High / Low limits setting
1. Press the
2. The display will show the message "000000L"
lesser than ± 2% of maximum capacity.
key to view the A/D count.
key to enter.
and key at the same time.
key.
8