Dynex DX-E402 Manual De Instrucciones página 12

12
5 Click Obtain an IP address automatically, click the DNS Configuration tab, then
click Disable DNS.
6 Turn off your router and your computers. Then turn them back on again. The built-in
DHCP server assigns IP addresses for the computers.
Note: To test your network connector, see "To test your network connection" on page 15.
To configure TCP/IP to obtain an IP Address manually on your computers:
1 Connect the local computers to the LAN ports on your router using category-5 cables
with RJ-45 connectors.
2 On the Windows taskbar, click Start, Settings, then click Control Panel.
Appendix - FAQ