Roadstar CD-770BT/HP Manual De Instrucciones página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing:
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a
procedure used to connect 2 Bluetooth devices together.
1. This unit's Bluetooth function is always on, perform the pairing starting from your
cellular phone. Refer to your cellular manual on proper pairing.
2. Perform the search for available Bluetooth devices, "CAR--BT " will show. Enter '0000'
when asking for code.
3. After successful pairing (BT-ON appear in the display), connect to the head unit if it is
not automatically connected.
How to make / receive calls using front panel
• To make calls using call history:
1. Press "REDIAL" then
to display history of last 5 numbers.
or
2. Press "
" to dial out.
• Press the MODE button until "PHONE" is displayed then dial the phone number using
the 1-9 butons to dial the desired number.
• During conversation, press "BD/CL" button to end call.
• When there is incoming call, press "
• Press "BD/CL" button to reject incoming call.
Audio Streaming (A2DP)
1. If your phone is "A2DP" format compatible, you can play music in your mobile and the
music will be transferred to car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. You can press
or
on head unit for previous or next tracks.
>>
<<
English
" button to receive call.
13
14
English
SPECIFICATIONS
CD/MP3 PLAYER SECTION
Signal to Noise Ratio
Channel Separation
Frequency Response
TUNER
Sensitivity
Stereo separation
Signal to noise radio
Frequency range
Channel step FM:
Channel step MW:
Intermediate frequency
LINE-OUT
Output
Impedance
GENERAL
Power Supply
Speaker impedance
Output power
Note: Specifications and the design are subject to possible modification without notice due
to improvement.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working
life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other
commercial wastes for disposal.
> 70dB
> 50 dB (1kHz)
20Hz - 20 kHz
2 dBμ
35 dB
55 dB
FM: 87.5-108 MHz MW: 522 / 1620 KHz
50 kHz
9 kHz
10.7 MHz
350mV max.
10kOhm
13.8V DC
(10.8-15.6V allowable)
4 or 8 ohm
25 W (RMS) x 4CH, 4 x 45 W M. Power
Tabla de contenido
loading

Tabla de contenido