Range Master RMBA-3001X Manual Del Usuario página 11

STEP 3
Install the Left Leg Support (6) onto legs (2) and (4) using M6*42 Screws (A) and M6
Flange Nuts (B). Install the Right Leg Support (31) using the same hardware as the Left
Leg Support. Do not tighten screws until Step 5 is completed.
Insert Axle (8) through the holes at the bottom of legs (1) and (3). Put the Wheels (7) on
the ends of the Axle. Thread M10 Lock Nuts (K) onto each end of the Axle and tighten
with Wrench (O).
STEP 4
Put the Bowl (9) on top of the legs.Note
that the holes for the hinges should be
at the back of the grill.
Assemble the Front Shelf Support Piece
(10) and the Bowl (9) through legs (3)
and (4) using M6*42 Screws (A) and M6
Flange Nuts (B).
Assemble the Bowl (9) through legs (1)
and (2) using M6*42 Screws (A) and M6
Flange Nuts (B).
Assembly instructions
11