Grass Cutting; Preparing The Machine - inventiv INV T6553 TBV Manual De Instrucciones

8. GRASS CUTTING

8.1 PREPARING THE MACHINE

NOTE - This machine can be used to mow lawns in a number of different ways; before starting
work, prepare the machine based on how the lawn is to be mowed.
DO THIS WHEN THE ENGINE IS OFF.
A) Preparation for mowing and grass collection by the grass catcher:
– Lift the rear discharge guard (1) and fasten the grass catcher (2) correctly as shown in the illus-
tration.
B) Preparation for mowing and rear grass discharge on the ground:
– Remove the grass catcher and check that the rear discharge guard (1) maintains its lowered
position.
– On models with a side discharge: make sure that the side discharge guard 4) is lowered and
blocked by the safety lever (3).
C) Preparation for mowing and mulching (where applicable):
– On models with a side discharge: make sure that the side discharge guard 4) is lowered and
blocked by the safety lever (3).
– Lift the rear discharge guard (1) and fit the chute cap (5) in the discharge opening, keeping it slightly
tilted to the right. Fasten it by fitting the two pins (6) into the holes provided until the fastener tooth
(7) clicks into place.
To remove the deflector cap (5), lift the rear discharge guard (1) and push in the middle to release the
tooth (7).
3
9 EN