Composite Video Output; Component Video Output; Subwoofer Output - Akai ADI-18K Manual Del Usuario

COMPOSITE VIDEO OUTPUT

1. Connect a RCA cable to the Composite Video Output and a television.
2. Power on the TV set and the unit.
3. Adjust the connected television to the proper input setting.
4. Press VIDEO button repeatedly to switch between Composite and Component video output
modes.
5. Video from a docked iPhone/iPod or the connected DVD or the like can now be played through
the unit to the connected television.

COMPONENT VIDEO OUTPUT

The Component Video Output jacks will only output video from a docked iPod/iPhone. It cannot
output video from the A/V input.
1. Connect a component video cable to the Component Video Output jacks on the unit and a
television.
2. Adjust the connected television to the proper input setting.
3. Press VIDEO button on the remote to switch to Component video output modes.
4. Video from a docked iPhone/iPod can now be played through the bar speaker to the connected
television.

SUBWOOFER OUTPUT

The AKAI ADI-18K comes with a built-in subwoofer and allows you to output the subwoofer signal
to an external amplifier (such as a 2.1CH amplifier or 5.1/6.1/7.1CH amplifier or a 2.1CH micro
system) via the SUB OUTPUT jack on the rear of the AKAI ADI-18K. Follow the below steps to
connect the external amplifier:
1. Use a RCA cable to connect the external amplifier with a SUB INPUT jack to the Sub Output
jack on the AKAI ADI-18K.
2. Power on the AKAI ADI-18K and the external amplifier.
3. When audio is played through any source, the sound will be produced from the AKAI ADI-18K
and the connected external amplifier synchronously for enhancing the sound effect.
All manuals and user guides at all-guides.com
31