Appearance; Operation - PRO Intellect Technology MONIRON DEC MULTI Manual De Operación

2
3
1
Figure 1
1. Receiving tray.
2. Banknote supply mode indicators. The upper indicator corresponds with forward
supply mode, the lower one- backward supply.
3. 'ADD/DIR' button switches on 'Add'/ off 'onE' mode of summing up nominal values. If
hold 'ADD/DIR' button for 3 seconds, banknote supply mode switches
(forward/backward).
4. 'CLR' button. Clears display values. Holding the button down within 3 seconds allows
to switch on/off the detector.
5. LED display showing the quantity of counted banknotes.
6. LED display showing the nominal of counted banknotes.
7. RS-232 COM-port for PC - connection. The program and the instruction of installation
is available on the web-site www.pro-intell.com
3
1. By means of the supplied ac adapter connect the detector to the mains of 100-240V
50/60Hz. At the same time on the detector panel the green indicator should blink.
2. To switch on the detector hold the button 'CLR' down within 3 seconds. After self-test
the detector is ready for operation.
3. If needed select banknote supply mode.
In case of forward supply mode, after a banknote is tested it will be placed from the left
side (as shown on Fig.2) and a banknote, which has not passed the test, will be placed
from the right side (as shown on Fig.2). To set forward and backward supply mode hold
2 6 5

Appearance

4
7
Figure 2

Operation

5