Studio Gt Front Panel Layout - Samson Studio GT Manual De Instrucciones

Studio GT Front Panel Layout

1
2
4
5
6
1.
Silk Dome Tweeter - Smooth high frequency response produced from a 1-inch
silk dome tweeter.
2.
Low Frequency Driver - 4.25" extended range low frequency transducer.
3.
POWER LED (active) - Green LED illuminates indicating the unit is powered on,
ready for operation.
4.
Clip LED - The Clip LED will illuminate red when the input signal reaches clipping
point. If the red Clip LED lights often or stays lit for any period of time, lower the
input gain level on that channel.
5.
Input Gain Level Knob (GAIN) - Controls the input level of the associated Mic/
Inst input (6).
6.
Microphone/Instrument Inputs (Channel 1 & Channel 2) - Each XLR / ¼" combo
connector will accept a standard mic, line or instrument level signal. Phantom
power is provided on the XLR microphone input.
7.
Phones Level - Controls the overall output level to the left Headphone output (8).
8.
Headphone - 3.5mm stereo output jack for connecting headphones.
9.
STEREO/MONO Button - This button allows you to select the direct input
monitoring between stereo and mono operation. In Mono mode, the input
signals will be heard equally in the left and right side of the Studio GT. In Stereo
mode, Channel 1 will be heard in the left and Channel 2 will be heard in the right.
8
7 8 9 10
Studio GT
11 12
3
4
5
6