PRO POWER PS1330 Manual De Instrucciones

PS1330 – DC-REGULATED POWER SUPPLY 13.8V/30A
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the PS1330! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Operation
1. Insert the AC power plug in a 220V-outlet.
2. Connect the power cord of a device with the appropriate input voltage to the output binding posts on the front
panel. The red positive (+) terminal and black negative (-) terminal are indicated on the front panel. Mind the
polarity: reversal of polarity may damage the device.
3. Put the ON/OFF switch on the front panel in the "ON"-position. The light in the switch will come on.
4. The 220V-input is protected by the fuse, which is located at the back of the device. Replace a blown fuse with an
identical one.
5. This device is protected against brief short circuits and equipped with an automatic reset function.
3. Warning
Do not use the PS1330 with devices requiring an input current > 30A.
Do not use this device outdoors and do not expose it to rain, water or other liquids.
Do not open the housing yourself. Have the device repaired by qualified personnel.
Let the device cool for 10 minutes for every half hour of use at full power.
Select a location where the working of the heat sink will not be impeded by walls or large objects.
Max. load: 32A for 1 minute, cool down during min. 15 minutes / 24A for 2 hours, cool down during min. 15
minutes / 12A continuously.
Also consult the wiring diagram.
For more info concerning this product, please visit our website www.hqpower.com.
The information in this manual is subject to change without prior notice.
PS1330 – DC-GESTUURDE VOEDING 13.8V/30A
1.Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen,
dit toestel schade kan toebrengen aan het milieu.
Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een
gespecialiseerd bedrijf terechtkomen voor recyclage.
U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen.
Respecteer de plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering.
PS1330
1 HQPOWER