Pre-Installation Checklist - BIG ASS FANS BAFCon Guia De Instalacion

PRE-INSTALLATION CHECKLIST

Before installing the controller, install the fan according to the
fan installation guide.
The controller will be mounted to a flat, readily accessible
surface that is free from vibration and away from foreign
objects and moving equipment.
A rectangular or square outlet box is installed at the controller
mounting location.
If SmartSense will be used, the controller will be mounted so
that it is NOT:
•
•
•
•
The controller has built-in temperature and humidity sensors
that will not provide accurate information for automatic fan
control if the controller is mounted in these areas.
If multiple fans will be daisy chained, the multi-fan accessory
kit is included.
The accessory kit is included only if ordered. Contact Customer
Service to purchase the kit.
Installation Guide
10/09/2020
Rev. H
All trademarks used herein are the properties of their respective owners. No part of this document may
be reproduced or translated into a different language without the prior written consent of Big Ass Fans.
The information contained in this document is subject to change without notice. For the most up-to-date
information, see the online installation guide at www.bigassfans.com
www.bigassfans.com/patents ▪ www.bigassfans.com/product-warranties
Adjacent to or above a radiant heat source
Near HVAC ventilation intakes/exhausts
On a poorly insulated exterior wall
In a different temperature/humidity environment than the
fan it will control