Backlight; Battery Replacement; Water Resistance; Specifications - Oregon Scientific GP108 Manual De Usuario

BACKLIGHT

To activate backlight: tap on lens.
Tap on lens again or press any button to extend backlight for
another 3 seconds.
NOTE The backlight function will not operate when there is
only 1 segment remaining in this icon

BATTERY REPLACEMENT

The GP108 uses 1 x AA battery which has already been
installed.
If the battery power of the unit is low (2 or less remaining
segments) promptly replace the battery to ensure
continuous operation of GPS and other functions.
To replace battery:
1. Slide open the battery compartment cover.
2. Remove the old battery and insert a new battery.
3. Replace battery compartment cover.

WATER RESISTANCE

The GP108 is splash proof only.
SPECIFICATIONS
Real time clock
Speed
Distance
Maximum lap count
.
Power
Operating
temperature
Storage temperature

PRECAUTIONS

To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using the
product:
•
•
•
8
12/24 hour with hour,
minute
0-150 km/h or mph
0-9999 km / miles
99
1x UM3 (AA) 1.5V battery
-10 °C to 50 °C
(14 °F to 120 °F)
-15°C to 70 °C
(1 °F to 158 °F)
Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use luke warm water and mild soap to clean
the unit thoroughly after each training session. Never
use the products in hot water or store them when wet.
Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
treatment may result in malfunction.
Do not tamper with the internal components. Doing so will
terminate the product warranty and may cause damage.
The main unit contains no user-serviceable parts.