Precaution For Use; Before You Start - Premier BP-4716 Manual De Instrucciones

IMPORTANT INFORMATION
 Please read this instruction manual thoroughly so that you completely understand the operations,
cautions, performance and limitations with this monitor. After reading this manual, please keep it
for future reference.
 You should not use this blood pressure monitor for self-diagnosis, self-treatment or to change
medication without consulting your physician or other health care professional. Should you have
any doubt or question about your blood pressure measurements, you should consult your
physician or other health care professional.
 This device is contained high-precision parts; therefore, avoid exposing it to extreme temperature
or humidity or to direct sunlight, shock and dust.
 Do not attempt to calibrate or repair this monitor. If you have any questions regarding the
function or operation of this monitor, please contact our service agent so we can provide you with
accurate information.
 Should the monitor or cuff need cleaning, use a dry, soft cloth or a cloth dampened with water
and a mild detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the
monitor or cuff.
 Remove and replace the batteries if the monitor is not used for more than 6 months. Alkaline
batteries recommended.

PRECAUTION FOR USE

The Wrist Automatic Blood Pressure Monitor is designed to be operated by anyone who is eighteen
years and older or by medical professionals to monitor blood pressure (systolic and diastolic) and pulse
rate.

BEFORE YOU START

Please make sure you have installed 2 "AAA" (1.5 volt) batteries (alkaline batteries recommended). To
install batteries or replace them if the "Low Battery" symbol appears on display), proceed as follows:
Battery Loading
■
★ Remove the battery compartment cover by gently pushing down on arrow and
sliding cover forward.
★ Place batteries with positive "+" and negative "-" terminals into
compartment and make sure they match the indicated terminals in
the compartment.
★ Close the battery cover by gently sliding it into the
compartment and pressing it into place.
Note：
★ When the LCD display shows "Low Battery" signal
must be replaced for accurate readings.
★ Do not use rechargeable batteries with a voltage of 1.2Veach because
P-2
,the batteries