Suavinex BW060 Manual De Instrucciones página 21

· NOTE:
- These quantities are for Suavinex bottles / breast milk storage bags. If you are using another brand of
bottle, make sure the milk/food is at the right temperature at the end of the heating cycle. The heating
times may differ slightly.
3- Carefully place the bottle/jar in the water tank (A) (if using a breast milk storage bag, you will already
have inserted it in the previous step). Make sure the water does not overflow out of the appliance or into
the bottle.
4- Plug the power supply cable (F) into the mains. At this point the bottle warmer is in OFF mode.
5- Press the ON/OFF button (C) to select the heating mode (FIG A).
6- Select the desired mode and the starting temperature of the bottle/jar/bag by turning the dial (B) (FIG. B)
mODE / TEmPERATuRE TABLE
express mode: for a
bottle of formula milk
jar mode: for a glass jar
of baby food/purée
gentle mode: for a
bottle of breast milk
gentle mode: for a bag
of breast milk
7- Each time you turn the dial (B) the LEDs (E) corresponding to the amounts available for that mode will
flash green (FIG C).
8- Select the amount of food to heat by pressing the button (D) that is closest to the volume being heated
(80 ml/ 150 ml/ 270 ml) (FIG D). A constant green LED will show the selected option and the other options
will be switched off.
· NOTE:
- If you have made a mistake during the selection process, press any button to start again.
9- Once you have chosen the amount you wish to heat, press the ON/OFF button (C) to start the heating
cycle. During this cycle the LED of the chosen amount (D) will be orange.
10- When the cycle ends:
- In express mode and in jar mode: the orange LED of the chosen amount (D) will flash for 30 seconds. At
that point the appliance will return to OFF mode.
· imPORTANT:
- We recommend removing the bottle/jar immediately so that the food does not continue to heat up and
exceed the recommended temperature of 37ºC, as the food could burn.
- In gentle mode for breast milk: the orange LED of the chosen amount (D) will flash slowly for 19 minutes
and 30 seconds. During this time the bottle remains at the ideal temperature for the feed. After this keep
warm time, the orange LED will flash faster for 30 seconds to indicate that the cycle has ended. At that
point the appliance will return to OFF mode.
room
temperature
fridge
temperature
freezer
temperature
· NOTE:
- If you wish to switch off the appliance during the keep warm time in gentle mode, press the ON/OFF
button (C).
11- When the cycle has ended, remove the bottle/bag/jar from the bottle warmer, taking care not to get
the power cable wet.
12- Unplug the power cable from the mains (F).
· RECOmmENDATiONS:
- Once the milk is heated, shake it gently for a few seconds and make sure it is at the right temperature
for the baby by pouring a few drops onto your wrist.
- Once the baby food/purée is heated, stir it and try it to make sure it is at the right temperature for the
baby.
Fig A
Fig C
EN - 39
Fig B
Fig D