Starline ROLDECK Manual Del Usuario página 14

User manual Starline Roldeck
Press the middle key "light symbol"
again once to save the "CLOSE"
position. The hourglass "" shows
CLOSE
OPEN
again a short waiting time.
1 sec.
When the Roldeck is programmed,
PROG
the display changes to the
programming menu.
The "" indicates that the
programming was successful.
Go to exit and press the middle key
"light symbol" to finish this program.
Also remove the jumper on the PCB
of the controller!
For "fine" tuning Roldeck see
following pages.
RDCM V03-1015
14