Operation; Basic Operation - EGAmaster COD.60119 Manual De Instrucciones

Basic Operation
1. As you roll the power switch to turn on the camera, the power indicator on the camera handle will light. The rolling switch
then acts as a dimmer for the twin LEDs that surround the camera on the end of the flexible tube.
2. Press and hold the button
monitor.
3. You can record videos and take pictures at once or do different operational settings.
Note:
* When it is used, the tube should be easily maneuvered into place. Do not apply excessive force.
TIP!
- The flexible tube can be bent in many ways. They can help you to explore areas with difficult access.
- Can be used to retrieve small objects like rings, screws,... with the included accessories (for 16mm/9mm).
Recording Video
1. In real-time monitoring mode, press the button
2. Press it again to stop recording.
* It can make video recordings with voice due to device contain a microphone.
Notice!
* The video will be automatically saved as an individual file every 30 minutes.
* In the real time monitoring mode only, video recording can be conducted by
* "Memory Full!" appears on the LCD screen indicating that the SD card memory is full.
Taking photos
In the real-time monitoring mode, press the
Notice!
* In the real-time monitoring mode only, taking photos can be conducted by
* "Memory Full!" appears on the LCD screen indicates that the SD card memory is full.
Playback Video/Picture
1. In the real-time monitoring mode, press the button
2. Press and
toggle to the right interface.
on the top of the monitor for 2 seconds or until the picture from the lens is displayed on the
button to take a photo.
buttons at the bottom of the monitor to select your desired folder, and then press the OK button to

OPERATION

on top of the monitor to begin recording.
button.
to toggle to the video/picture folder.
button.
-17-