Troubleshooting - Steren AIR-250 Manual De Instrucciones

7. After removing the water tank, remove the packing that is in the drain hole to drain the
water.
8. Wash out the water tank, wipe with a cloth and place the packing into the hole.
9. To clean the device surface, turn it off and unplug it. Only use a cloth or a soft brush to
clean dust from the intake grilles and air output.

TROUBLESHOOTING

TROUBLE
The dehumidifier
it doesn´tt work.
The dehumidifier
collects little water.
Water drips from the
front of the unit.
* Make sure you are properly plugged the power cable to the power adapter
and to the outlet.
* Verify that the LED adapter remains on.
* Turn on the device.
* Check that the water tank is correctly positioned so that the internal switch
will be activated.
* Empty the water tank when will be full.
* Remove any objects that are blocking the air input.
* Check for open doors or windows, since a large amount of air flow prevents
the team absorbed properly.
* Make sure that the device is not placed in a location where the temperature
is higher or lower than the allowable limit.
* Observe the surface on which you placed the dehumidifier, if it is irregular,
change it to a flat place to avoid inclinations or fall hazards.
SOLUTIONS