Ingo Hello Kitty HEV002N Manual De Instrucciones página 3

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
It is required to operate camera regularly during long time storage. Please check
whether the camera operates normally or not before using the camera again.
If dirt or stain is accumulated on the camera or lens, it is required to use a piece of
soft, clean and dry cloth to wipe it out lightly. If the camera or lens is stained with
sand grain, it is available to blow it away lightly. Never use cloth to wipe. Otherwise,
it may scrape the camera or lens surface.
If it is required to clean the lens surface, blow away firstly the sand dust
accumulated on the surface, and then use dish cloth or paper towel suitable for the
optical equipment to wipe the lens lightly. If there is such requirement, please use
the lens cleaning compound. Never use organic solvent to clean the camera.
Never touch the lens surface with finger.
If it is the first time to use a memory card in the digital camera, please carry on
information backup for the card first. Then format the memory card once at the
digital camera.
The external SD card and MMC card are made with precise electronic components.
The following conditions may cause the information lost or damage:
1.
Use the memory card incorrectly.
2.
Memory card is subjected to bend, fall or impact.
3.
Heat, humidity and direct sunlight.
4.
Static or electromagnetic field around the memory card.
5.
Take out the memory card or interfere the digital camera power supply when
the digital camera or computer is accessing the memory card (i.e. read, write
and format, etc.)
2 2 2 2
Tabla de contenido
loading

Tabla de contenido