Operation And Use; Preparation; Cleaning And Maintenance - Beem Startherm Manual De Instrucciones

12 EN

Operation and use

Switch on/off
The appliance is turned on and off via the
cooking time :
1. Set the temperature before starting.
2. Set the desired operating time. The appli-
ance switches itself on and remains switched
on until the operating time has elapsed or the
when the clock is set to 0.
Setting the temperature
1. Set the desired temperature (90-230 °C)
by turning the rotary knob
The temperature can be changed at any time
during the cooking process.
Setting the cooking time
1. Set the desired cooking time by turning
the rotary knob
An acoustic signal is emitted after the coo-
king time has elapsed.

Preparation

General instructions
The food should be at room temperature
‹
since frozen food requires longer to cook and
can also dry out.
To achieve particularly good results, pre-
‹
heat the appliance briefly. Pay good
attention to the cooking process and regulate
the tem-perature – if necessary.
You can use the appliance to prepare va-
‹
rious different foods, e. g., sausages, steaks,
roasts, poultry, roast pork, vegetables,
casse-roles, toast, pizza (max. diameter
22 cm), cakes etc.
The appliance is especially good for
‹
quick food preparation.
°C (2).
(4).
BEEM - Elements of Lifestyle
NOTE
► Condensation can occur on the oven
door during the cooking process.
Using the appliance
1. Insert the baking tray.
2. Insert the plug into the mains socket.
3. Set the cooking temperature as descri-
bed in the section Setting the temperature.
4. Set the cooking time as described in
the section Setting the cooking time.
NOTE
► The temperature and cooking time
settings can be changed at any time during
cooking.
► Check in advance that your cake/
baking mould fits into the appliance
► Make sure that the dough for the cake
or bread does not brim over when rising
during baking and come into contact with
the inner walls and heating elements of the
appliance.
► Preheat the oven for approx. 4-5 min.
After using
1. Pull the plug out of the mains socket.
2. Allow the appliance to cool down
and clean the appliance as described in the
section Cleaning and maintenance.

Cleaning and maintenance

Before beginning any work, pay attention to
the safety instructions in the section Safety
precautions!
Clean the appliance as soon as it has
‹
cooled down. Waiting too long makes
cleaning unnecessarily difficult.
CAUTION
► Do not insert any objects into the hea-
ting elements. They could be damaged.