PLYMOVENT Multidust bank BM-2 Instrucciones Para El Uso página 23

4.2 Damper mounting
Adjustment damper
The supplied damper for adjusting the air flow is to be fitted to
the filter's outlet side.
4.3 control box
CONT-A24
Contains a controller card for sequential pulsing of the valves
in the high-efficiency cleaning system. Each magnetic valve is
activated from the control cabinet. After-cleaning with the fan
turned off, "shut-down cleaning", is included as standard.
LED 1: PULSE INDICATOR
LED 2: PAUSE INDICATOR
LED 3: SHUT DOWN CLEANING ACTIVATED.
LED 4: OK RUN
LED 5: REMOTE
Setting of parameters (always before starting up
the filter unit)
• Press SELECT MENU: With "ADJUST + or -" select
NUMBER OF VALVES connected.
• Press SELECT MENU: With "ADJUST + or -" select PULSE
TIME (0.01-9.99 sec.) Normal setting = 0.25 sec.
• Press SELECT MENU: With "ADJUST + or -" select PAUSE
TIME (1 - 999 sec.)
• Press SELECT MENU: With "ADJUST + or -" select
NUMBER OF CYCLES FOR SHUT DOWN CLEANING.
By selecting 000 the shut down function will be off.
This function requires a signal from the fan controller, see
schematics.
• Press SELECT MENU: LED 4 turns on, in the display E1
will appear, cleaning cycle will start.
0000100513/011212/0 MDB
1
E
2
3
4
5
SELECT
MENU
ADJUST
1
22
0