Chauvet Professional Epix Drive 900 Guía De Referencia Rápida página 5

ÉPIX Drive 900 QRG
Connecting
ÉPIX Products
Length of cables between products must
not exceed 60 ft (18 m) when shielded,
or 100 ft (30 m) when unshielded
The ÉPIX Drive 900 is the power supply for the ÉPIX Tour and ÉPIX IP series of
products. Each product must be daisy chained together in series.
Length of cables between ÉPIX Drive 900 and
1 st product must not exceed 65 ft (20 m) when
shielded, or 150 ft (45 m) when unshielded
Total length of cables cannot exceed 210 ft (64 m)
when shielded, or 300 ft (91 m) when unshielded
The ÉPIX Drive 900 can support various ÉPIX products daisy chained
•
in various configurations.
Example configurations include:
18 ÉPIX Strip Tour products.
•
36 ÉPIX Strip Tour 50 products.
•
6 ÉPIX Bar Tour products or ÉPIX Strip IP products.
•
12 ÉPIX Strip IP 50 products.
•
4 ÉPIX Bar Tour products and 6 ÉPIX Strip Tour products.
•
4 ÉPIX Strip IP products and 6 ÉPIX Strip Tour products.
•
15 ÉPIX Strip Tour products and 1 ÉPIX Bar Tour product.
•
Make sure the total length of the connecting shielded 4-pin XLR cables
•
does not exceed 210 ft (64 m). Using unshielded cables will increase the
maximum cable lengths to 300 ft (91 m) shown in the diagram above.
Download the User Manual from
more details.
Standard 4-pin XLR "Scroller Cables" are typically shielded.
•
IP rated cables are recommended when using ÉPIX IP products.
•
Indoor Cables
1 = Power + (16 AWG or larger)
2 = Data + (18–24 AWG)
3 = Data - (18–24 AWG)
4 = Power - (16 AWG or larger)
www.chauvetprofessional.com
5
EN
for