ÉPIX Drive 900 QRG
Connecting
ÉPIX Products
Total length of
shielded cables
cannot exceed
210 ft (64 m)
The ÉPIX Drive 900 is the power supply for the ÉPIX Tour series of products.
Each product must be daisy chained together in series. This power supply is
capable of powering up to 900 LEDs in the various configurations.
Length of shielded cables between
ÉPIX Drive 900 and 1
must not exceed 65 ft (20 m)
Length of shielded
cables between
products must not
exceed 60 ft (18 m)
·
The ÉPIX Drive 900 can support various ÉPIX products daisy chained
in the various configurations up to a total of 900 LEDs.
Example configurations include:
·
18 ÉPIX Strip Tour products.
·
6 ÉPIX Bar Tour products.
·
4 ÉPIX Bar Tour products and 6 ÉPIX Strip Tour products.
·
15 ÉPIX Strip Tour products and 1 ÉPIX Bar Tour product.
·
Make sure the total length of the connecting shielded 4-pin XLR cables
does not exceed 210 ft (64 m). Using unshielded cables will increase the
maximum cable lengths to 300 ft (91 m) shown in the diagram above.
Download the User Manual from
more details.
Standard 4-pin XLR "Scroller Cables" are typically shielded.
st
product
1 = Power +
2 = Data +
3 = Data -
4 = Power -
www.chauvetprofessional.com
5
EN
for