Technical Specifications - Toolland AC15 Manual Del Usuario

The automation of the charging process will require an automatic charger (specifically for this battery or series
of batteries).
6. Fuses
The AC15 has 3 safety fuses installed.
Thermal fuse: this fuse cuts of the output power when the temperature of the charger is too high. Power

automatically restores when the temperature drops below an acceptable level.
Input fuse [4]: protects the charger from power anomalies on the mains input power. To replace,

disconnect the charger from the mains and disconnect the connected battery. Unscrew the holder [4]
(counter clockwise) and replace the broken fuse by a fuse with the same specifications (F2A/250V). Tightly
screw the holder back in place.
Output fuse [2]: protects the connected battery from over-current. To replace, disconnect the charger from

the mains and disconnect the connected battery. Simply unplug the fuse from the socket and install a new
one. Only use a fuse with the same specifications (15 A).
7. Maintenance
Always remove the plug from the mains socket and disconnect batteries when servicing or cleaning the

charger.
Never use water or any other liquids to clean the charger.

Keep the cables clean, but avoid using cleaners based on benzene, trichloroethylene, chloride, ammonia... as

they affect or even dissolve plastic parts.
Check liquid level of batteries once per month and fill up when necessary.

Dispose of batteries in accordance with local regulations.

8.

Technical specifications

rated input voltage ...................................................................................... 230 V~, 50 Hz
rated output current ................................................................................................... 7 A
boost current ............................................................................................................. 9 A
exchangeable fuse ..................................................................................................... 15 A
reference battery capacity .......................................................... min. 25 Ah to max. 135 Ah
IP-code .................................................................................................................... IP20
weight ................................................................................................................... 4.8 kg
dimensions ........................................................................................ 300 x 210 x 185 mm
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 02 – 09/10/2017
AC15
5 ©Velleman nv