Cleaning And Storage - Velleman UPS600N1 Manual Del Usuario

•
Press the 'Connect and Detect UPS' button to establish connection between UPS and PC.
•
Use the 'Review History' button to analyse the history file.
•
Use the 'Shutdown Status' button to check the shutdown status.
•
Use the 'Configuration' button to configure the software.
o Set the software language to English, Simplified Chinese, Tradition Chinese, French,
Spanish, Japanese, German, Italian, Russian or Portuguese.
o Set the 'expected battery life' and 'battery life when battery low' parameters depending
on the connected load.
o Set the 'Time between power failure and initial warning message' and the 'delay
between warning messages'.
o Choose whether to show the information when the program starts or not.
o Click 'OK' to save settings.
•
Use the 'Notification' button to configure mail, pager and audible warnings.
o When applicable, check 'Enable E-mail notification' and click on 'E-mail setting' to
configure the internet connection and E-mail address.
o When applicable, check 'Enable Pager notification' and click on 'Pager setting' to
configure modem settings and pager identification.
o Check the desired notifications for 'power fail', 'power restored' and 'battery low'
st
warnings (1 column: audible, 2
o Click 'OK' to save settings.
•
Note that when a power fail occurs, a shutdown countdown is shown (seconds to
shutdown) and the UPS will display a warning to confirm that the connected PC may be
shut down.

Cleaning and storage

9.
• There are no user-serviceable parts. Contact your dealer for spare parts if necessary.
• Wipe the exterior of the UPS regularly with a moist, lint-free cloth. Do not use abrasive
solutions or solvents.
• When stored in a moderate climate, charge the UPS once every 3 months for ±12 hours to
extend its lifetime. Under higher temperatures, charge for ±12 hours every 2 months.
00 (26/11/2008)
UPS600N1
nd
column: E-mail, 3
5
rd
column: pager)
®
Velleman