Display And Controls - OHAUS MB90 Guia Del Usuario

3. OPERATION

3.1 Display and Controls

1
1
2
3
4
5
Leveling Feet
6
MAKING A SIMPLE MEASUREMENT
2 3
Turns On or Off display.
When pressed, sends Print command.
When pressed, either starts or stops the drying process.
When pressed, performs Tare function.
Leveling indicator
Used to level the Moisture Analyzer.
If the display is not visible and the unit is plugged into a power source, press the On/Off
button.
Directly start a measurement.
Open the cover on the Moisture Analyzer.
Place the pan handle in the sample chamber. Ensure that the tongue of the pan handle
fits exactly in the slot of the draft shield element.
Place the empty sample pan and glass fiber pan in the pan handle.
Note: It is advisable for you to work with the pan handle at all times. The pan handle is
ergonomic, safe and provides protection against possible burns due to a hot sample
pan.
Close the cover. This sets the Moisture Analyzer to zero automatically.
Open the cover on the Moisture Analyzer.
Wet the glass fiber pan with a 0.5 to 1 gram of water.
Note: Minimum sample size must be greater than 0.5 gram.
Starting the test
Close the cover, the Moisture Analyzer starts the drying and measurement process
automatically.
4 5
WARNING: As the pan and sample may still be hot, you
should let these cool down before removing the pan from the
pan handle!
6
EN-3