Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BACKLIGHT / KEYPAD LOCK / LED LIGHT
TO ACTIVATE BACKLIGHT / KEYPAD LOCK
/ LED LIGHT
Press
to turn backlight ON for 3 seconds.
NOTE The backlight and LED functions will not operate
while the low battery icon
return to normal once battery has been replaced.
To toggle keypad lock ON / OFF:
Press and hold
keypad is locked.
To turn on LED light:
Press
.
ALTIMETER AND BAROMETER
ABOUT THE ALTIMETER-BAROMETER
The altimeter measures altitude in either metres or feet.
The device is equipped with an intelligent barometer
that determines altitude by the built-in sensor with
the advanced Baro-compensation technology. It also
distinguishes the differences between pressure caused
by the changes in physical altitudes and pressure caused
by weather conditions. This eliminates discrepancies
and makes the altimeter more accurate than most of
is displayed and it will
for 2 seconds.
indicates
the average devices available on the market. Maximum
altitude and instant sea level pressure readings are
also provided.
TO SET AND RESET ALTIMETER
The altitude is automatically measured from the moment
you switch on the device. It will supply you with both
barometer readings as well as the maximum sea level
pressure readings.
To set and reset altimeter:
1. Press ALT / + to navigate to altimeter mode.
2. Press and hold ALT / + to enter settings.
3. Press ALT / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
The setting options are as follows: adjust altitude;
reset maximum altitude.
5. Press ALT/+; choose NO to keep maximum altitude
recorded or YES to reset memory data. Press TIME
to confirm.
TO SET SEA LEVEL PRESSURE AND
WEATHER FORECAST ICONS
1. Press BARO / - to navigate to barometer mode.
2. Press and hold BARO / - to enter settings.
3. Press ALT / + or BARO / - to change setting.
4. Press TIME to confirm and move to the next setting.
5
Capítulos
Tabla de contenido
