Troubleshooting - Zibro H 108 Instrucciones De Uso

TROUBLESHOOTING

Check the following before contacting technical support:
Problem
The unit does not work.
Moisture is not generated
The humidifier works, but
does not sufficiently
increase the relative
humidity.
The device does not
humidify.
4
48
Cause
The power cord is not connected.
The water container has not been
replaced correctly.
Water container is empty.
The inside of the device is dirty.
The room is too large.
The water reservoir is too full.
Too much moisture is absorbed.
There is too much ventilation
The air inlet is clogged.
The relative humidity in the room
in which the device is operating is
too high or the temperature is
too low.
Solution
Insert the plug into the socket
Place the water container in the
correct position.
Fill the water container with
water.
Wipe inside of the body with a
soft cloth.
We recommend using a
humidifier with a greater
capacity.
Remove some water from the
water reservoir.
We recommend using a
humidifier with a greater
capacity.
Reduce ventilation (e.g. close
curtains and shut doors).
Clean the air inlet.
It is normal that the device does
not humidify in these conditions.