Candy FREESPACE Instrucciones Para El Usuario página 7

CLEANER MAINTENANCE:
Replacing the dust bag (depending on model) - If the bag check indicator is
illuminated (P15) please check and, if necessary, replace the dust bag.
1. Remove the hose from the cleaner (P1).
2. Press buttons on handle (P16) and remove the bag door (P17).
3. Pull the bag collar to remove the dust bag (P18) and carefully dispose of the
bag into a bin.
4. Fit a new bag into the cleaner by inserting the bag collar into the bag holder.
Important: The hose must be removed before removing or replacing the dust bag.
Remember: The bag check indicator will also illuminate if an obstruction has occurred.
In this case refer to the section "Removing a blockage from the system".
Emptying the permanent dust bag (depending on model) - If the bag check
indicator is illuminated (P15) please check and if necessary, empty the permanent
dust bag.
1. Remove the hose from the cleaner (P1).
2. Press buttons on handle (P16) and remove the bag door (P17).
3. Pull the bag collar to remove the dust bag (P18) from the cleaner.
4. Remove the plastic guide at the end of the bag allowing dirt collected to fall
into the bin (P19).
5. Return the guide back into the original position.
6. Replace the permanent dust bag by inserting the bag collar into the bag
holder.
7. Check the filters for excessive build up of dust and if necessary clean the
washable filter (see 'Cleaning the washable filters').
Removing the pre-motor and exhaust filters
To remove the Hepa pre-motor filter:
1. Open the bag door and remove the dust bag from the cleaner (see 'Replacing
the dust bag').
2. Press the latch at the top of the Hepa pre-motor filter frame to unlock it from
the cleaner. Tilt then remove the filter from the cleaner (P20).
To remove the Purefilt exhaust filter:
1. Unlatch and remove exhaust filter cover (P21)
2. Remove the washable exhaust filter.
Cleaning the permanent dust bag (depending on model) - To maintain optimum
performance we recommend that you wash the permanent bag under handwarm
water after every 5 full bags. Remove excess water with a dry cloth and leave to dry
fully before replacing.
Cleaning the washable filters - To maintain optimum performance please tap and, if
necessary, wash the pre-motor and exhaust filters after each bag change using
handwarm water. Remove excess water with a dry cloth and leave to dry fully before
replacing.
Candy Bagged Standard.indd 3
3
GB
04/02/2008 17:04:16