Easyteach-Philosophy - Rechner Sensors EasyTeach P3 Manual De Instrucciones

EasyTeach-philosophy

Adjustment of the sensitivity with EasyTeach by Wire (ETW):
The EasyTeach menu starts, by activating the EasyTeach connection (Teach wire / Teach pin with the
supply voltage UB+). The menu goes through the different menu items. The desired Menu point is selected
by disconnecting the wire.
Adjustment of the sensitivity with Easyteach by Button (ETB):
The EasyTeach menu starts, by pushing the EasyTeach Button. The menu goes through the different menu
items. The desired menu item is selected by releasing the EasyTeach-Button
Adjustment of the sensitivity with Easyteach by Magnet (ETM):
The EasyTeach menu starts, by holding the EasyTeach magnet on the teachspot. The menu goes through
the different menu items. The desired menu item is selected by removing the magnet
EasyTeach-menu
Antivalent output
Adjustment „Empty"
Adjustment „Full"
Test
The procedures of the EasyTeach menu are different depending on which mode of the output
i
function you are in. There are options for an adjustment "Empty" or an adjustment "Full" with
the Antivalent output function. With the Normally Open / Normally Closed function there are
two "Full" adjustments for the two independent switching points.
EasyTeach-Chart
The EasyTeach charts are used for optical menu navigation. They illustrate the flashing behaviour of the
LED and the switching of the output at the various menu items
EasyTeach-chart
Antivalent output
EasyTeach chart*: LED LED / Output function
28
Yellow = A1 Green = A2
Adjustment "Empty"
Initializing "Empty"
Adjustment "Full"
Initializing "Full"
Test
EasyTeach-menu
2 x N.O. / 2 x N.C.
Adjustment S1
Adjustment S2
Test
EasyTeach-chart
EasyTeach chart*: LED LED / Ausgangsfunktion
2 x N.O. / 2 x N.C.
Gelb = A1
Adjusment S1
Leereinstellung
Initializing S1
Leereinstellung Initialisierung
Adjusment S2
Volleinstellung
Initializing S2
Volleinstellung Initialisierung
Test Test
Grün = A2