Troubleshooting - Restube basic Manual De Uso

5. Troubleshooting
Problem
Buoy does not fi t into the
pocket
Velcro does not close
CO2 cartridge is pierced
immediately when screw-
ing in
CO2 cartridge
be screwed in or only
screwed in with much
diffi culty
Trigger is not accessible
or only with much diffi -
culty
22
WARNING
If the buoy is not positioned correctly in the pocket, correct release is
not guaranteed!
• Position the folded buoy in the pocket so that the nut on the
trigger mechanism is facing the label with the nut symbol
>>> The trigger cord must hang out of the pocket
• Store the rest of the safety leash in the pocket next to the
cartridge
>>> Do not store safety leash in the key compartment in the
fl ap of the pocket!
• Connect the triangular velcro 4d on the trigger cord to velcro
4b on the fl ap
• Close the fl ap of the pocket
Cause
Buoy is not fully emptied
Buoy is not folded correctly
Buoy is not positioned
correctly in the pocket
The release lever was not
closed before screwing in
the CO2 cartridge
cannot Dirt on the thread or trigger
mechanism
Trigger was packed into the
pocket
Wrong position and align-
ment of the pocket on the
body
Corrective action
> Empty buoy completely
> Observe packaging in-
structions
> Nut on the trigger must
face the label with the
nut symbol
> Close release lever and
secure with securing clip.
Then screw in new CO2
cartridge
> Clean the trigger mech-
anism
> Trigger must hang out
from the pocket
> Observe correct posi-
tioning and alignment of
the pocket on the body:
trigger must be easily ac-
cessible!