Cleaning And Maintenance; Technical Specifications - HQ-Power PROMIX30 Manual Del Usuario

5. Connections
• Make sure the power switch (p.2 #10) is set to "OFF" before making any connections.
• Use only high quality audio cables to minimize sound quality losses.
• Connect your amplifier to the MAIN output (p.2 #22) and any recording device to the REC output (p.2 #21)
• Connect your microphone to the MIC input (p.2 #14) and your headphones to the PHONES output (p.2 #17).
• Connect your record players to the PHONO inputs (p.2 #25 & 27) and set the selection switches (p.2 #23 or 24) to PH.
• Connect any line signals to the LINE (LN) inputs (p.2 #26 and 28 are line inputs only ; for inputs #25 and 27 you
need to set the switches 23 and 24 to the LN side).

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections...
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts.
7. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power supply
Microphone input
Phono inputs
Line inputs
Equalizer high
Equalizer bass
Master output
Record output
Frequency response
Distortion
S/N ratio
Headphones impedance
Dimensions
Total Weight
Fuse
The information in this manual is subject to change without prior notice.
PROMIX30_v2
max. 230VAC/50Hz
1.5mV / 2k / balanced
3mV / 47k
150mV / 27
+12dB / -12dB
+12dB / -12dB
0dB / 1V / 600
0dB / 1V / 600
20Hz~20kHz +/-2dB
0.02%
>80dB
160
280 x 200 x 112mm
2.7kg
F 0.5A, 250VAC (5 x 20mm) (order code FF0.5N)
5
VELLEMAN