Recommendations For Installation; General Notes; Installation - Tam-EU MNS00007.01 Manual De Instrucciones

1. Reception:
On receiving the equipment, check carefully that the packaging is intact and has not been damaged in transit.
After unpacking, check that you have all the components and if the characteristics correspond to those on the order
form.
Installation, maintenance and other work should be carried out by specialised and authorised technicians. The manufacturer
accepts no responsibility and will not cover the guarantee if these conditions are not respected.
This appliance must be used according to this manual and only for the manufacturer's purpose. The incorrect use of the equipment
can cause damages to the equipment and to users.
As a result of our constant effort to make technological improvements, the specifications indicated here are subject to change
without warning.
2 - Identification Plate:
Our models have a plate behind the control panel on which the main data can be found. The MODEL and SERIES / YEAR are
absolutely essential when consulting the manufacturer.
MODELO 1
RESISTÊNCIA PORTA
CÓDIGO 2
ILUMINAÇÃO (MAX.)
N.º SERIE/ANO 3
DESCONGELAÇÃO
CORRENTE 4
REFRIGERANTE
TENSÃO/FREQ. 5
CLASSE CLIMÁTICA
6
POTÊNCIA
Legend:
1 - Model
2 - Code
3 - Series no./Year
4 - Current (A)
5 - Voltage / Frequency (V / Hz)
6 - Power (W)

3 - Recommendations for Installation:

3.1 - General Notes:

Although the production and operation (as prove the enclosed test report) of each appliance is rigorously controlled during
manufacture, this does not exclude the possibility of damage caused in transit. The general condition of the appliance should
therefore be checked on arrival.
3.2 - Placing:
Remove the packaging or pallet carefully so that the equipment's surfaces are not damaged. Remove the PVC
•
protection.
The appliance should be installed away from heat sources (ex: heating appliances) and direct sunlight.
•
The air vents should never be covered or blocked - must be guaranteed free space to this areas, assuring a good air circulation.
•

3.3 - Installation

The following standards should always be bared in mind during installation:
Regulations concerning the buildings, and anti-fire standards.
•
Rules concerning accident prevention.
•
European standards into effect.
•
The appliance is supplied with a plug complying test standards, and with a regulation power cord long, enough to allow
•
connection to the electric socket.
The socket should be easily accessible and the right size for maximum consumption (see identification plate). It must have an
•
EARTH WIRE.
Never use sockets or plugs without an earth wire, nor should you use adapters or extensions.
•
For direct connections to the current, a circuit breaker must always be installed. This complies international standards.
•
MNS00007.01
TEC 00
Instruction Manual
7
8
9
10 11
12
MADE IN PORTUGAL
7 - Doesn't apply
8 - Doesn't apply
9 - Doesn't aplly
10 - Coolant
11 - Amount of Coolant (g)
12 - Temperature class
N.º
MNS00007.01
8/8