Name Plate (Fig.2); Models; Dimensions And Weight; Mechanical Connections - CIAT COMFORT LINE Serie Manual De Instrucciones

3.1 Name plate
The data plate contains all the information required to identify the unit and its
configuration. The plate is located on the opposite side to the electrics box. Before
contacting us, please note the serial no. and the designation.
Code
Serial number
Description of the unit
Nominal motor output
Motor rotation speed
Coil type

3.2 Models

The Comfort Line is available in 8 standard models:
I : Metal sleeve on discharge and metal
sleeve optional on intake
Y : Supply plenum with collars for round
ducts + metal sleeve optional on
intake
H : Return and supply plenum with
collars for round ducts
U : Return and supply plenum with lateral
collar for round ducts.

3.3 Dimensions and weight

- Dimensions and weight, see Fig. 20

4.1 Mechanical connections

The Comfort Line must be suspended from the ceiling using 4 or 6 threaded rods
either 6 mm or 8 mm in diameter (not supplied), which are fixed to the unit's 4 or 6
oblong holes using anti-vibration resilient mounts (optional, Fig.3, a) or a nut/washer
assembly positioned on either side of the mounting bracket (Fig.3, b).
Note: CIAT strongly recommends the use of anti-vibration resilient mounts when
securing the unit, in order to reduce the transmission of vibrations through the
building structure during operation.
For LI, LIk, LY and LYk models, the unit should ideally be positioned inside the
suspended ceiling in the entrance corridor of rooms, with the supply air opposite the
window. The unit must never be placed in the centre of the room.
N.B.:
NA 12.48 F
Wiring diagram reference
Motor speed wiring
Maximum service pressure
Electric heater specifications (if fitted)
LI : Air recovery grille integrated into
the device, with air supply via
rectangular sleeve
LIk : LI model + air distribution kit
LY : Air recovery grille integrated into
the device, with air supply via
collars
LYk : LY model + air distribution kit
EN - 2