Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

■ Quick Start Guide
Please follow these instructions for fast and simple installation. For more information,
please refer to the full User Manual after completing the HP SWING+ Console installation.
Remote Buttons
Remote Joystick
B Button
Controls player location
or directional movement.
A Button
M Button
Menu button.
Bluetooth Button
Use to connect the remote
to your computer.
Battery cover
Installing and Changing Batteries
1. To open, push the
2. Remove battery cover. If batteries are
battery cover with your
pre-installed, please pull the plastic tab out
thumb as shown
to enable the
below.
battery connection.
If batteries are not
pre-installed, please
install them now.
Type of batteries: AA
Number of batteries: 2
Using the Remote Strap
1. Place the wrist strap around
2. Move the wrist strap slider
your wrist, and hold the
towards your wrist.
remote as shown.
Version : 3.0
Installing the HP SWING+ Console
IMPORTANT: Do not plug in the supplied USB Bluetooth dongle unless
you are prompted to do so.
Step 1.
Insert the DVD into your computer.
Select a language, then click "Next."
LED Lights
Shows player number
Step 2.
and battery level.
Please follow the on-screen instructions
1 or 2 to complete the installation.
1
Wrist strap
Wrist strap slider
2
Start Playing Games
Step 1.
Double-click the HP SWING+ desktop
icon to start the Virtual Game Console.
Step 2.
Press the Bluetooth button to
connect the remote to the computer.
Step 5.
Rotate the remote in a CIRCLE as
shown above.
Step 3.
Click "OK" to start the game console.
IMPORTANT: Third-party games
must be launched from the
HP SWING+ console in order to
Note:
work correctly with the HP SWING+
For detailed information, you can
Remote.
access the User Manual through the
Windows Start Menu.
Step 3.
Place the remote HORIZONTALLY on a
flat surface and keep it stationary.
!
•Non-rechargeable batteries are not to be recharged;
•Rechargeable batteries are to be removed from the toy before being charged;
Step 4.
•Rechargeable batteries are only to be charged under adult supervision;
Hold the remote VERTICALLY, rotate it
COUNTERCLOCKWISE for a full CIRCLE.
•Different types of batteries or new and used batteries are not to be mixed;
•Batteries are to be inserted with the correct polarity;
•Exhausted batteries are to be removed from the toy;
•The supply terminals are not to be short-circuited;
•Only batteries of the same or equivalent type should be used.
Batteries Warning
•Do not mix old and new batteries;
•Do not mix alkaline, carbon-zinc or rechargeable batteries.
Step 6.
Please hold your remote in a
comfortable position and point your
remote towards the center of the
screen, then press the joystick button.
Installing Third-Party Games
If you try to play a third-party game
outside the HP SWING+ console, you
will see the following reminder
message. Click "Yes" to open the
HP SWING+ console, and you will be
brought to the launch page of your
game.
Please make sure there is sufficient space
before playing games.
WARNING: Please allow sufficient space around you to prevent
hurting anyone or damaging nearby objects.
2010, 2011 Hewlett-Packard Development Company, L. P. HP, Hewlett-Packard, and
the Hewlett-Packard logo are trademarks of Hewlett-Packard Development Company, L.P. in the US and other countries.
PN : 3139 235 53881
HP PN : 668734-001
loading

Resumen de contenidos para HP SWING+

  • Página 1 Step 5. Step 6. Installing the HP SWING+ Console please refer to the full User Manual after completing the HP SWING+ Console installation. Please hold your remote in a Rotate the remote in a CIRCLE as comfortable position and point your shown above.
  • Página 2 Paso 5. Paso 6. Instalación de la Consola HP SWING+ referirte al Manual del Usuario completo luego de completar la instalación del HP SWING+ Consola. Por favor, sostén tu control remoto en Rota el control remoto una posición cómoda y apúntalo hacia completando un CÍRCULO según...
  • Página 3 Etapa 5. Etapa 6. Instalação do console do HP SWING+ consulte o Manual do Usuário completo depois de terminar a instalação do console do HP SWING+. Segure o controle remoto em uma Gire o controle remoto em um posição confortável, aponte-o para o CÍRCULO como mostrado acima.
  • Página 4 équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. CONSERVAR ESTA ETIQUETA PARA FUTURAS REFERENCIAS. PN : 3139 235 53881 HP PN : 668734-001 Version : 3.0...

Este manual también es adecuado para:

Rcgp400512/01