23. Open/close
24. Numeric keys
25. Audio
26. Subtitle
27. Previous/next track
Previous/next station
28. Play/pause and am/fm
29. Step
30. Return
31. Setup
32. Enter
33. Title
34. Zoom
35. VFD
36. EQ
37.Volume+/-
38. Tone
39. Mic volume
System connection illustration
1. Connect with Y,Cb,Cr video input socket
2. Connect with Audio signal input socket (Audio component)
3. Connect with FM antenna
4. Connect with AM antenna
5. AUX input socket
WARNING: DO NOT PLACE SPEAKERS CLOSE TO TV, PLEASE ENSURE TO KEEP AT LEAST 20cm
BETWEEN TV AND SPEAKERS.
Press to open/close the CD/DVD tray
The 0-9 keys can be used to directly select a program. For numbers of 10 or
above press 10+
Press to change the audio (if available) of the disc
Press to change the subtitle language (if available on disc)
After pressing the memory key, use these to change the number (or press
numerical keys). Use the key to select a station. Press during playback to
skip to the next or previous track
While the radio is active use these to change between FM to AM.
During playback you can use this key to pause
Press this key to view a sequence image by image
Press this key when playing disc to return to the title menu
Press to enter general setup/audio setup/Dolby setup/video setup/
preference setup. Use directional keys to navigate. Press again to exit menu
Press this key to confirm selections in the menu displayed on the screen
Press this key to return to the title menu of the DVD disc
Press this key when playing a DVD/VCD, the original picture will be
increased by 2x,3x,4x
Press this key to adjust the balance (up or down)
Use to switch the EQ settings (Jazz, Classic, Rock, Pop, DSP on/off)
Press the keys to adjust the volume
Press to select the main volume, bass, treble and subwoofer volume.
Use Vol +/- to adjust the effect
When the Mic is activated use these key to adjust the volume
Power input: ~110V-240V/50-60Hz
4