Tokai TC-135 Manual De Instrucciones página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

TIME & ALARM SETTINGS + BASIC OPERATIONS
TIME MANUAL SETTING
In standby mode, press and hold the SET - MEM/M+ button (2).
"24 Hr" will blink. Press the Tune
format between 12 hour (12 Hr) format and 24 Hour (24 Hr) format.
Press the SET - MEM/M+ button (2) and the hours will blink.
Press the Tune
(5) or Tune
Press the SET - MEM/M+ (2) button again then the minute digits will blink. Press
the Tune
(5) or Tune
Once setting done, press SET - MEM/M+ (2) button once again to indicate the
current time is set.
ALARM SETTING
Press the AL.1 / AL.2 button (6/7) once to preview the alarm time.
The alarm time is displayed and will blink, press & hold the AL.1 / AL.2 button
(6/7) for 3 seconds and the hours will blink.
Press the Tune
(5) or Tune
Press the AL.1 / AL.2 button (6/7) again; the minute digits will blink. Press the
Tune
(5) or Tune
Press the AL.1 / AL.2 button (6/7) to set the alarm sound mode: Buzzer or
Radio.
The alarm sound mode will blink. Press Tune
alarm sound mode.
If you select alarm sound mode with Radio, the volume will blink on the display.
Press Tune
(5) or Tune
Then press the AL.1 / AL.2 button (6/7) when setting is done.
Note: when the alarm rings, the volume of the alarm will gradually increase.
When the alarm 1 or 2 rings, to turn it OFF press on the AL.1 / AL.2 button
(6/7). Alarm 1 / 2 will ring again at the same time the next days.
To stop completely Alarm 1 / 2 the following days, press & hold AL.1 / AL.2
button (6/7) for 3 seconds in standby mode, the alarm 1 / 2 icon will disappear
and Alarm 1 / 2 will be disabled for the next days.
To resume Alarm 1 / 2, press & hold AL.1 / AL.2 button (6/7) again for 3 seconds
in standby mode.
SNOOZE FUNCTION
When the alarm rings, press SNOOZE button (3) to suspend the alarm & to
activate the snooze function, Alarm will stop & will ring again 9 minutes later.
Press SNOOZE key again, alarm will be suspended again, another 9 minutes
(5) or Tune
(1) to set the current hour.
(1) to set the current minutes.
(1) to set the alarm hour.
(1) to set the alarm minutes.
(1) to set the alarm radio maximum volume.
14
(1) button to set the hour
(5) or Tune
(1) to set the
Tabla de contenido
loading

Tabla de contenido