Display Functions - Tokai TC-146W Manual De Instrucciones

TO SET / RECALL THE RADIO PRESETS
1. Press the ON/OFF button (7) to turn the unit ON.
2. Use the Tune + or Tune - button to select the desired radio station.
3. Press and hold the memory / memory + button; "P01" will blink in the display.
4. Use the Tune+ or Tune- button to select the desired preset station (P01-P10)
5. Press the memory / memory + button again to set the preset.
6. Repeat steps 2 through 5 to set more presets.
7. The unit can preset 10 stations totally for radio station.
8. When "P01-P10" is blinking, press the Tune+ or Tune- button to select the
preset number.
9. To recall a preset station, press memory / memory + button to select the
preset number.
SLEEP OPERATION
When listening to radio, press Snooze / Sleep button (10) to enter sleep mode.
You can just adjust the sleep timer from 90 mins to 15 mins by pressing the
Snooze / Sleep button (10). The unit will automatically turn off after the selected
time.
NAP TIMER FUNCTION (COUNT DOWN TIMER)
In radio off mode, press NAP button (11) to turn on NAP mode, the NAP time
will keep by 5 seconds, within 5 seconds and press NAP button (11) button can
change the duration from 90 min – 10 min.
The alarm buzzer will sound for 30 min and then shut off automatically. To stop
the alarm buzzer, press the ON/OFF button (7).
Press the NAP button (11) has no effect during alarm operation. Press ON/OFF
button (7) to cancel NAP function.
POWER SAVING ON-OFF FUNCTION:
In radio off mode, press and hold POWER SAVING button (10) for 3 seconds.
"ON" appears on the display (3). The LED display will turn dimmer low after
15 seconds automatically, Press any button to maintain the LED display for 15
seconds.
To deactivate this function, in radio off mode, press and hold POWER SAVING
button (10) for 3 seconds. "OFF" appears on the display (3) to cancel this
function.

DISPLAY FUNCTIONS

23