Technical Specifications - Tokai TCP-124 Manual De Instrucciones

SET THE LIGHT INTENSITY OF THE LAMP SHADE
Press the Light Intensity High button (1) to increase the intensity of
the light.
Press the Light Intensity Low (2) button to decrease the intensity of
the light.
DAYLIGHT SAVING TIME (DST) MODE
For countries with daylight saving time (DST) (one hour of difference
between summer time and winter time), this clock radio offers you
DST option to adjust summer time.
In standby mode press and hold for 2 seconds the >>/TUNE+/DST
button (12).
The clock advances by one hour. To exit DST mode, repeat the above
operation.
RESET
If the system does not respond or exhibits erratic or intermittent
operation, you may have experienced an electrostatic discharge (ESD)
or a power surge that triggered the internal microcontroller to shut
down automatically. If this occurs, simply disconnect the ac power
cord and remove the system backup battery, wait at least 3 minutes
and then setup the unit again by following the manual.

TECHNICAL SPECIFICATIONS

Model Number
Power Supply
Power consumption
Standby power consumption
Battery backup
Radio Frequency Coverage
Audio output power
Net Weight
Dimensions
Temperature range for Indoor • 0 to + 50°C or 32 to 122 °F
• TCP-124
• AC 230 ~ 50 Hz
• 5W
• 1 W
• 3V (CR2032 Flat Lithium battery x 1)
not included
• FM: 87.5MHz - 108 MHz
• 120MW
• 0.430 g
• 126×100×140 mm
20