Newteck dual 365 Manual De Instrucciones página 47

TURBO MODE (this button only works with cold air)
When you press the Turbo Mode button on the remote control,
the screen will display "HH" and the air speed will increase to
maximum.
Press again to exit turbo mode.
(You can also exit the current mode by pressing the "+" button
to increase the air).
OScILLATION
Pressing this button will activate the oscillation function.
This fan can turn 80º to the left and right.
Press this button again to stop the oscillation.
MUTE
Press the button to turn off the fan tone. The fan cancels the
beeps that sound when modes are selected with the control.
cOLD MODE
In this mode, the LED lamp is blue.
Pressing this button will activate cooling mode.
Note: The default start mode is cooling mode.
INcREASING/DEcREASING AIR FLOW
Press the "+" button on the left side of the remote control to
increase the air flow, press the "-" button on the left side of the
remote control to decrease the air flow. Up to 9 levels can be
set in cold mode, up to 4 levels can be set in heat mode.
HEAT MODE
The number on the screen in heat mode is displayed in orange
orange.
Press this button to activate heat mode.
Note: "Turbo Mode" and "Sleep Mode" do not work with "Heat
Mode".
INcREASING/DEcREASING TEMPERATURE
In heat mode, press the temperature button on the right side of
the remote control to set the temperature (1-30 °C).
Note: this button does not work in cold mode.
47